Complete Guide to Repair Canon Printer Error Code E03

Canon is one of the most important names when it comes to the printer. The company manufactures computer printers, multifunction printers and industrial printers. Canon devices are very popular due to their extensive low-cost printing technology. But technical devices are very unpredictable due to technical errors and sudden and unknown errors. These technical failures and failures can cause permanent damage to your device if you did not receive adequate help in a limited time. Therefore, contact the Canon printer support team for instant help without delay.

Error E03 determines that there is an error in the printer during printing. To solve the problems from your device, follow this blog until the end. We have discussed some of the effective solutions and the steps through which you can resolve the error code e03 of the Canon printer within a minimum time.

But before that, let's look at the main cause of the error. Error E03 mainly causes:

• When the cover is open or not seated properly.
• There is a paper jam inside the printer.

Steps to correct the error code of Canon E03

1. Close the ink cover:

• First, open the ink cartridge cover located on the front of the machine.
• Now close the ink door securely. Make sure the door closes and the top of the door is level with the edge of the document scanner cover.
• If the error persists.
• Open the ink cartridge cover located on the front of the machine.
• Press down on the gray release levers to release the 4 ink cartridges. Do not remove the ink cartridges from the machine.
• Now push each of the 4 cartridges back slowly and firmly until they click into place, and make sure that the lever is upright
• After that, disconnect the device power cord from the power outlet for 5 seconds, then plug it back in.
• If the problem persists, follow the following method.

2. Clearing paper jams:

• Cancel all printing and turn off the printer, then connect the power cord.
• Open the paper tray and then open the paper cover.
• Make sure there is no material inside (protective material or jammed paper) If you see the jammed paper, slowly remove or remove the jammed paper while avoiding the FINE cartridge.
• Confirm that the cartridge is installed correctly, then turn on the machine.

Once you complete the steps, print a test paper. If the error code E03 still persists, contact Canon printer technical support through Toll-free + (1)-833-486-0565. We provide service 24 hours, 365 days. Then, when you find an error, contact the support team without delay. if you have problems with the installation of the Canon printer driver, printer errors or connectivity problems Contact our toll-free number of Canon printers for help.